®Imported LayersImported Layers Copy 3earth iconhamburgerOval 8Rectangle 158Imported Layers Copy 2Imported Layers Copy 17
Thumb11
Thumb11
  1. Products
  2. Our Brands
  3. EZ Chill®
  4. RLS-3 | R-134a with Leak Sealer and UV Dye

RLS | R-134a with Leak Sealer and UV Dye



Product Features

  • All-in-one solution – no additional tools required
  • Replaces lost R-134a refrigerant and oil in automotive A/C system
  • System-safe leak sealer additive seals common A/C leaks in rubber hoses, gaskets and O-rings
  • Built-in disposable recharge hose in a shelf-saver cap

Usage Directions

  1. Always use protective gloves and eye wear
  2. Shake can well. Start engine and set A/C to maximum cooling.
  3. Locate A/C low-side service port and connect recharge hose.
  4. Depress the top button. Allow contents to flow into the A/C.
  5. While charging, rotate can between 12 o’clock and 3 o’clock every two to three seconds while continually agitating (shaking) the can back and forth.
  6. Continue this process until the can is empty (five to 15 minutes) or until the correct amount of refrigerant is charged into the A/C system.
  7. When the can feels empty, hold it upside down for one minute to dispense remaining contents before removing from service port. DO NOT OVERCHARGE SYSTEM!

Available Size 

10.25 oz.

Product Guide Instructions A/C Service Port Finder FAQs